John Atkinson

Joseph's Pulsar

"It's like the Pearl but in a more easily digestible form," explained Jeff Joseph, as he demmed the Long Island's company's new Pulsar speaker for me. The stand-mounted speaker keeps as much as possible of the cost-no-object Pearl's qualities, but uses a new magnesium-cone woofer from SEAS with the same throw as the Pearl's 7" unit.

Continue Reading »

In All Directions

The omnidirectional MBL speakers, which use a unique pulsating quasi-spherical array of ribbons, make a strong argument for the benefits of this design approach. Featured in their room when I visited was the new 111F ($35,000/pair), which uses the "Radialstrahler" drivers for the treble and upper midrange, with conventional drive-units used for the lower frequencies. A big change from the earlier version I <A HREF="http://www.stereophile.com/loudspeakerreviews/643">reviewed in 2002</A> was the use of side-firing direct radiators for the bass rather than the 111B's coupled-cavity LF enclosure. These are mechanically coupled to eliminate vibrational excitation of the enclosure.

Continue Reading »

Fooled Ya!

When I went into the Magnepan room at T.H.E. Show, the speakers were hidden behind a curtain. Magnepan's Wendell Diller ushered me into the sweet spot and started playing some sounds on the all-Bryston front-end: BCD-1 CD player (which LKG raves about in our February 2009 issue), BP-26 preamp, and a pair of 7B-SST monoblocks.

Continue Reading »

Signature Speaker from RBH

RBH Sound is best-known for its home-theater speakers, but CES saw the Utah-based company launch a "Signature" series of speakers that were demo'd in two-channel systems. I listened to a Telarc Aaron Copland recording on the three-way, sealed-box 8300-SE/R towers ($8449/pair), with a Boulder 1021 CD player and Boulder 860 power amplifier, and was impressed by the natural balance, extended low frequencies, and good dynamics.

Continue Reading »

Verity's Finn

Montreal-based company Verity has been slowly building a reputation for sound quality with its unique speakers, which combine a conventional head-unit on-top a woofer module that, unusually, mounts the drivers on its rear. CES saw the launch of two new models, the Leonore ($15,995/pair) and Finn ($5995/pair). Both speakers offer high sensitivities in the low 90s, and while the Leonore produced an impressive sound from Keith Jarrett's <I>Live at Carnegie Hall</I> CD powered by Nagra's forthcoming MSA stereo amp that Wes Phillips blogged about earlier, I was also impressed by the more affordable, one-box Finn, which was demmed with Nagra's PMA "pyramid" amps. The rest of the system included a Basis Debut turntable and Vector 4 tonearm, Nagra PLL preamp and Nagra's new battery-powered BPS phono stage, which I am sure Mikey Fremer will be reviewing in the near future.

Continue Reading »

It's Good to be the King

I had been impressed by the Prince V2 speakers from Hansen Audio, when Wes Phillips <A HREF="http://www.stereophile.com/floorloudspeakers/408hansen/">reviewed it</A> for <I>Stereophile</I> a few months back. (Mikey Fremer has written a follow-up for our forthcoming March 2009 issue.) But the 2009 CES was my first chance to hear the Canadian manufacturer's top-line King V2 speaker ($89,000/pair). Powered by CAT amplification, with Stealth cables, the LP of Louis Armstrong's classic performance of "St. James Infirmary" produced a big sweep of sound, with superbly natural tonalities and extended lows, though you could also hear that Hansen's Wes Bender had played this LP a few too many times over the decades!

Continue Reading »

Sonic Beauty

Wes Phillips gave me the tip. "You must check out the Sonicweld room. Their active Pulserod system uses the DEQX digital crossover." So I checked it out. Comprising two 4'-tall Pulserod towers and two Subpulse subwoofers, the system costs $110,000 but includes all amplification&#151;three 200W class-D ICE modules for the upper-range drivers in each tower and a1.1kW class-D amp for each 15" subwoofer&#151;the crossover module, cables, and even a remote control.

Continue Reading »

Lovely Loiminchay

The name "Loiminchay" comes from a line of high-end pens, I am told, and the prices of the superbly finished Loiminchay speakers are also high-end, the three-way Chagall pictured here coming in at $48,500/pair. But combining a 30mm diamond tweeter with ceramic-cone midrange and LF units in two multi-layer Birch-ply enclosures with a concrete plinth, the Chagall produced smooth, extended sound driven by a Bel Canto class-D power amp and a Nagra CD player.

Continue Reading »

Sweet-sounding Amphions

Perhaps it was the ridiculously expensive 20Wpc Lars tube amplifiers that Wes Phillips blogged about yesterday, but the modest-looking Prio 620 speakers (price starting at $5750/pair) from Finnish manufacturer Amphion, sounded both sweet and powerful on a track from bassist Brian Bromberg. The titanium-dome tweeter is loaded with Amphion's proprietary waveguide, which matches its dispersion above the low 1.2kHz crossover frequency to that of the twin 6.5" paper-cone woofers.

Continue Reading »

Cocoa from Croatia

CES is traditionally where new brands come to find US distribution, and the room next to <I>Stereophile</I>'s at the Venetian featured some well-finished and good-sounding speakers from Croatian company Audio Epilog, which they shared with Czech tube amp manufacturer KR. (Dig those humongous tubes!) The two-way Cocoa2 should sell for between $7000/pair and $8000/pair when it reaches these shores.

Continue Reading »
Advertisement
Advertisement
Advertisement