Jonathan Scull

Nagra's VPA amplification system consists of two slim, handsome monoblock amplifiers intended for vertical placement. They look good adjacent to the speakers. However, two 845 tubes put out a <I>lot</I> of heat, so the amplifier should be at least a foot away from your speakers...unless you're <I>looking</I> for a nice crackle finish.

Last month (click here for previous Fine Tunes) I tipped you on how to check the AC plug orientation for transformer current leakage—the best sound is often found at the lowest voltmeter reading. Roger Skoff of XLO suggests another technique that's worth passing on to you, if only because the imagery is so . . . piquant: Leave the speaker cables hooked up and pull the interconnects from the power amplifier. Turn it on and "stick your head in the speaker," as Roger puts it, checking for the level of hum. (Imagine a pair of bony audiophile legs waving crazily out of the bell of an Avantgarde Acoustics horn speaker.)

Okay, let's return to the power grid. In the February installment of "Fine Tunes", we learned that typical domestic 110V AC supplies are derived from that 220V transformer out on the pole. The center-tap 110V supply is unbalanced, but if you take 220V service, you're getting balanced power. One thing you can do is take 220V down to 110V with a step-down transformer. George Cardas swears by it. He's also experimenting with a Statpower Technologies Prosine 1000 Full Square Wave Converter hooked to a big mutha battery to power his front-end components.

I've heard it all a thousand times before:

Bill Gates would have you believe we live in a plug'n'play world. Apple has proselytized same since day one. But I'm here to tell you it just isn't so for high-end audio. The orientation of a component's AC plug—even the quality of the wall receptacle itself—affects the sound! Oh no, Mr. Bill, not something else to futz with! Will it never end?

One audio maintenance chore I dislike is getting down on all fours and cleaning the system's connectors—interconnects, speaker cables, and power cords. It's tedious, but the results can be spectacular. If you live in a relatively clean, dry environment, you might consider doing it every six months or so.

I've touched on loudspeaker placement in irregularly shaped rooms several times in the last few "Fine Tunes," but reader Peter Machare (Peter.MACHARE@usda.gov) wants more information about setting up L-shaped and other nonstandard listening areas. Here's how he describes his layout: "I have an L-shaped room. The speakers are at the bottom of the L and point up the long part of the L. Not all of us are perfect rectangles, you know."