Keith Howard

Cut and Thrust: RIAA LP Equalization

Until the Recording Industry Association of America hit the headlines in recent years with its antipiracy campaign, the initials RIAA meant one thing to seasoned audiophiles: the vinyl-disc equalization characteristic introduced in the 1950s to standardize what had previously been an anarchy of different EQs. Three decades later, as CD gained ascendance, a large proportion of audiophiles still knew what RIAA equalization was, and a good number of them had some idea or better of what the RIAA EQ curve looked like, and why it was applied.
Continue Reading »

Between the Ears: the art and science of measuring headphones

Headphones get pretty short shrift in much of the hi-fi press, which is puzzling—the headphone market is burgeoning. I don't know what the equivalent US figures are, but in recent years the UK headphone market has increased by an annual 15–20% in both units sold and overall revenue. It's easy to dismiss this as a natural byproduct of the Apple iPod phenomenon, but 20% of the market value is now accounted for by headphones costing over $120; a significant subset of consumers would seem to be looking for quality. When you also consider that many people's first exposure to higher-quality audio comes via headphones, there is ample reason for treating them more seriously.

Continue Reading »

Anti-Node: Active Room-Acoustics Correction

Recently, I assessed four disparate room-correction systems based on digital signal processing (DSP): Copland DRC205, Lyngdorf Audio RoomPerfect, <A HREF="http://www.stereophile.com/musicintheround/1105mitr">Velodyne SMS-1</A>, and <A HREF="http://www.stereophile.com/musicintheround/706mitr">Meridian DRC</A>. I concluded that Meridian's approach&mdash;which applies IIR (Infinite Impulse Response) "anti-resonance" filters to suppress room resonant modes, if only partially&mdash;was, in many respects, the best. What I particularly like about Meridian DRC is that, unlike the Copland and Lyngdorf processors, its approach to system tonal balance is largely hands-off. Yes, it lightens up the extreme bass a little, as you'd expect, but it doesn't recast the system balance in any way that might prove undesirable. If you like your system's tonal character as it is, Meridian DRC behaves just as you'd want a room-correction system to behave: it quells room resonance effects while leaving the system's essential sound well alone.

Continue Reading »

Heavy Load: How Loudspeakers Torture Amplifiers

Why, in loudspeaker reviews, is impedance measured (assuming that the magazine in question bothers to measure anything)? Generally, for one principal reason only: to establish whether the speaker presents an "easy" or a "difficult" load to its partnering amplifier. In the design context, much more information can be extracted from a graph of speaker impedance vs frequency—such as details of the bass alignment, and indications of internal or structural resonances that can be difficult to identify by acoustical measurements. But for a magazine audience, the principal interest in a loudspeaker's load impedance lies in gaining some indication of its compatibility with a given amplifier.
Continue Reading »

Hot Stuff: Loudspeaker Voice-Coil Temperatures

As Hans Christian Oersted, the Danish physicist and founder of electrodynamics, discovered in 1819, an electric current passed through a wire generates a magnetic field. Place that wire close to a permanent magnet and the interaction of the two fields will generate a force. That, in two sentences, summarizes the operating principle of the motor that energizes every moving-coil drive-unit in millions of loudspeakers worldwide. It sounds simple, but&mdash;like everything in audio&mdash;it isn't.

Continue Reading »

Wayward Down Deep

The audio diaspora is split on the subject of bass. Some audiophiles&mdash;surely the majority&mdash;consider the reproduction of low frequencies purely in terms of the weight and drama it adds to sounds with significant bass content. Others&mdash;the generalists&mdash;take a much wider view of the significance of extended bass response, noting that an audio system's ubiquitous high-pass filters are unusual in Nature and suggesting that this is one of the factors that separate, at the fundamental level, live sound from its poorer reproduced cousin. When John Atkinson wrote on this subject more than 10 years ago (<I>Stereophile</I>, November 1995, "<A HREF="http://www.stereophile.com/asweseeit/75">As We See It</A>"), he quoted a memorable line by Kal Rubinson that encapsulates this latter view: "Something in Nature abhors a capacitor."

Continue Reading »

Bob Stuart Talks About Active Loudspeakers

Bob Stuart, chairman and co-founder of Meridian, will deliver a lecture on active loudspeakers to the UK Section of the Audio Engineering Society in London on Tuesday, July 11. Although Bob has been a champion of active speakers for 30 years, he has, surprisingly, delivered only one previous paper on the subject, at the AES UK Conference earlier this year. In this lecture he will expand on that presentation and be able to discuss the topic more fully with the audience.

Continue Reading »

Euphonic Distortion: Naughty but Nice?

In 1977, just as I was about to take my first faltering steps in hi-fi journalism, the UK's <I>Hi-Fi News</I> ran two articles, translated from French originals by Jean Hiraga, that seemed to me and many others to turn the audio world we knew upside down. The second of them, "Can We Hear Connecting Wires?" was published in the August issue and is the better remembered because it introduced many English-speaking audiophiles to the contention that cables can sound different. The earlier article, published in the March issue, was less earthshaking but still an eyebrow-raiser of considerable force. Simply titled "Amplifier Musicality," it was a response to the word <I>musicality</I> being increasingly used in subjectivist circles to describe the perceived performance of amplifiers and other audio components. It was implicit that musicality was a quality not captured by conventional measurement procedures&mdash;a lack of correlation that Hiraga's article sought to address.

Continue Reading »
Advertisement
Advertisement
Advertisement